Network Video Recorder User Manual
183
Managing HDD Group
Setting HDD Groups
Purpose:
Multiple HDDs can be managed in groups. Video from specified channels can be recorded onto a
particular HDD group through HDD settings.
Enter the Storage Mode interface.
Menu > HDD > Advanced > Storage Mode
Set the Mode to Group, as shown in Figure 12-13.
Storage Mode Interface
Click the Apply button and the following Attention box will pop up.
Attention for Reboot
Click the Yes button to reboot the device to activate the changes.
After reboot of device, enter the HDD Information interface.
Menu > HDD> General
Select HDD from the list and click icon to enter the Local HDD Settings interface, as
shown in Figure 12-15.
Local HDD Settings Interface