HIKVISION HWN-2108MH-8P User Manual

Network Video Recorder User Manual
206
Restoring Default Settings
Enter the Default interface.
Menu > Maintenance > Default
Restore Defaults
Select the restoring type from the following three options.
Restore Defaults: Restore all parameters, except the network (including IP address, subnet
mask, gateway, MTU, NIC working mode, default route, server port, etc.) and user account
parameters, to the factory default settings.
Factory Defaults: Restore all parameters to the factory default settings.
Restore to Inactive: Restore the device to the inactive status.
Click the OK button to restore the default settings.
The device will reboot automatically after restoring to the default settings.

HIKVISION HWN-2108MH-8P Specifications

General

Brand	HIKVISION
Model	HWN-2108MH-8P
Category	Network Hardware
Language	English