Network Video Recorder User Manual
184
Select the Group number for the current HDD.
The default group No. for each HDD is 1.
Click the OK button to confirm the settings.
Confirm HDD Group Settings
In the pop-up Attention box, click the Yes button to finish the settings.
Setting HDD Property
Purpose:
The HDD property can be set to redundancy, read-only or read/write (R/W). Before setting the
HDD property, please set the storage mode to Group (refer to step1-4 of Chapter Setting HDD
Groups ).
A HDD can be set to read-only to prevent important recorded files from being overwritten when
the HDD becomes full in overwrite recording mode.
When the HDD property is set to redundancy, the video can be recorded both onto the
redundancy HDD and the R/W HDD simultaneously so as to ensure high security and reliability of
video data.
Enter the HDD Information interface.
Menu > HDD> General
Select HDD from the list and click the icon to enter the Local HDD Settings interface, as
shown in Figure 12-17.
To Next Page
Loading...
Need help?
General
