Network Video Recorder User Manual
160
Configuring Advanced Settings
Configuring Hik-Connect
Purpose
Hik-Connect enables the mobile phone application and the service platform page (www.hik-
connect.com) to access and manage your connected NVR, providing a convenient remote access to
the surveillance system.
The Hik-Connect can be enabled via operation on SADP software, GUI and Web browser. We
introduce the operation steps on GUI in this section.
Enter the Network Settings interface.
Menu > Configuration > Network
Select the Platform Access tab to enter the Hik-Connect Settings interface.
Check the Enable checkbox to activate the function. The Service Terms interface pops up as
below.
Service Terms
1) Create the verification code and enter the code in the Verification Code text field.
2) Check the checkbox of The Hik-Connect service will require internet access. Please
read Service Terms and Privacy Statement before enabling the service.
3) Scan the QR code on the interface to read the Service Terms and the Privacy
Statement.
4) Click OK to save the settings and return to the Hik-Connect interface.
To Next Page
Loading...
Need help?
General
