HIKVISION iDS-2CD9396-BIS User Manual

Network Traffic Camera • User Manual
21
Device Information
Set Serial Ports
Purpose:
Set the RS-485 parameters and RS-232 parameters in this page.
 The RS-485 ports are used to input signals related to traffic control, such as RS-485 radar and
vehicle detector. The number of available RS-485 ports can be different according to different
device models.
 The RS-232 port can be used in two ways:
− Parameters Configuration: Connect a computer to the device through the serial port.
Device parameters can be set by using software such as HyperTerminal. The
serial port parameters must be the same as the serial port parameters of
the device.
− Transparent Channel: Connect a serial device directly to the device. The serial device

HIKVISION iDS-2CD9396-BIS Specifications

General

Brand	HIKVISION
Model	iDS-2CD9396-BIS
Category	Security Camera
Language	English