Network Traffic Camera • User Manual
60
Chapter 11 Application Mode Configuration
Purpose:
This chapter introduces the parameters configuration under different trigger mode. The supported
trigger modes vary according to the device models.
Supported application mode may vary with different models. Please refer to actual device.
Mixed-traffic Lane
Mixed-traffic lane captures the vehicles via video detection. And it supports speed detection via
radar if external radar is connected.
Go to Configuration > Device Configuration > Application Mode, and select Application
Mode as Mixed-traffic Lane.
Set corresponding video analysis capture parameters.
1) Select Capture Interval as time or distance.
2) Enter Intervals in the text field.
3) Check the capture types, and select the picture number from the drop-down list.
The supported capture types may vary according to the device models.
Video Analysis Capture Configuration
4) Select Capture Type of advanced settings.
To Next Page
Loading...
Need help?
General
