HIKVISION iDS-2CD9396-BIS User Manual

Network Traffic Camera • User Manual
23
 MTU: Maximum Transmission Unit, which refers to the size of the largest data packet
transmitted in the TCP / UDP protocol network transmission.
 Multicast Address: The address of the multicast server is an IPv4 address (class D address),
which can be viewed by joining a multicast group.
 Preferred DNS server: DNS server address (IPv4 address).
 ANPR IP Address: ANPR listening IP address. Picture can be transferred from device to server
by setting ANPR IP address and ANPR port in ANPR protocol.
 ANPR Port: ANPR listening port. Picture can be transferred from device to server by setting
ANPR IP address and ANPR port in ANPR protocol.
 Listening Host IP Address: Picture can be transferred from device to server by setting listening
host IP address and listening host port.
 Listening Host Port: Picture can be transferred from device to server by setting listening host
IP address and listening host port.

ANPR listening will be prior listening when ANPR listening and listening are both set.

If you want to set listening as prior listening, check Picture Uploading Listening, and set
ANPR listening and listening.

The Multicast sends a stream to the multicast group address and allows multiple clients to
acquire the stream at the same time by requesting a copy from the multicast group
address. Before utilizing this function, you have to enable the Multicast function of your
router.

A reboot is required for the settings to take effect.
Click Save.
Set Port
Purpose:
Set HTTP port, RTSP port, SDK port information to connect corresponding client.
Go to Configuration > Device Configuration > System Configuration > Port.
Port Settings

HIKVISION iDS-2CD9396-BIS Specifications

General

Brand	HIKVISION
Model	iDS-2CD9396-BIS
Category	Security Camera
Language	English