HIKVISION iDS-2CD9396-BIS User Manual

Network Traffic Camera • User Manual
26
Set HTTPS
Purpose:
HTTPS provides authentication of the web site and associated web server that one is
communicating with, which protects against Man-in-the-middle attacks. Perform the following
steps to set the port number of https.
Example
If you set the port number as 443 and the IP address is 192.168.1.64, you may access the device by
inputting https://192.168.1.64:443 via the web browser.
The HTTPS port can be only set through the web browser.
Go to Configuration > Device Configuration > System Configuration > HTTPS.
HTTPS Configuration
Create and install the certificate.
 OPTION 1: Create private certificate.
1) Click Create private certificate.
2) Click Create and the following message box pops up as below.
Create Private Certificate

HIKVISION iDS-2CD9396-BIS Specifications

General

Brand	HIKVISION
Model	iDS-2CD9396-BIS
Category	Security Camera
Language	English