HIKVISION iDS-2CD9396-BIS User Manual

Network Traffic Camera • User Manual
27
3) Enter the parameters.
4) Click OK to save the settings.
 OPTION 2: Signed certificate is available. Start the installation directly.
1) Click Signed certificate is available. Start the installation directly.
2) Click View to find the saving path of the certificate.
3) Click Install to install the certificate.
 OPTION 3: Create the certificate request first and continue the installation.
1) Click Create the certificate request first and continue the installation.
2) Click Create to create the certificate request.
3) Click Download to download the certificate request and submit it to the trusted
certificate authority for signature.
4) After receiving the signed valid certificate, click View to find the saving path of the
certificate and click Install to install it.
5) (Optional) Click Delete to delete the certificate.
6) There will be the certificate information after you successfully create and install the
certificate.
Set Time
Time Settings
You can follow the instructions in this section to set the time synchronization and DST settings.
Go to Configuration > Device Configuration > System Configuration> Time Settings.
Select the time zone of your region.
You can adjust time manually. Or you can enable NTP (National Time Protocol) to
synchronize time of your device to the set NTP server.
 Manual Synchronization
Select Synchronization Mode as Manual Synchronization.
Check Device Time. The grayed out device time shows the current device time.
Click to set the system time from the pop-up calendar.
Manual Synchronization

HIKVISION iDS-2CD9396-BIS Specifications

General

Brand	HIKVISION
Model	iDS-2CD9396-BIS
Category	Security Camera
Language	English