HIKVISION iDS-TCD403-BI User Manual

Steps
1.
Click to start live view.
2.
Click to start recording.
3.
Click
to stop recording.
4.
Oponal: Click Conguraon → Local → Record File Sengs to view the saving path of record
les.
2.1.7 Start/Stop Two-Way Audio
The device supports two-way audio with terminals, such as computers.
Before You Start
The device is equipped with an audio input interface and audio output interface, which support
connecng with the corresponding devices, such as microphones and loudspeakers.
Steps
Note
The funcon varies with dierent models. The actual device prevails.
1.
Select a window to start two-way audio.
2.
Click to start live view.
3.
Click
to start two-way audio.
When speaking at the PC end, you can hear the voice at the device end and vice versa.
4.
Click
to stop two-way audio.
2.1.8 Enable/Disable Audio
Enable the audio if necessary aer connecng an audio input device under the audio & video
stream. Click
to enable and adjust it. Click again to disable this funcon.
Note
The funcon varies with dierent models. The actual device prevails.
2.1.9 Enable Digital Zoom
You can enable digital zoom to zoom in a certain part of the live view image.
Steps
1.
Click to start live view.
2.
Click
to enable digital zoom.
3.
Place the cursor on the live view image posion which needs to be zoomed in. Drag the mouse
rightwards and downwards to draw an area.
Network Trac Camera Operaon Manual
5

HIKVISION iDS-TCD403-BI Specifications

General

Brand	HIKVISION
Model	iDS-TCD403-BI
Category	Security Camera
Language	English