HIKVISION iDS-TCH44P-B User Manual

10.5 Set SSH
To raise network security, disable SSH service. The conguraon is only used to debug the device
for the professionals.
Steps
1.
Go to Conguraon → Device Conguraon → System Conguraon → Service .
2.
Uncheck Enable SSH Service.
3.
Click Save.
10.6 Set IP Address Filtering
You can set the IP addresses allowable and not allowable to access the device.
Steps
1.
Go to
Conguraon → Device Conguraon → System Conguraon → Service .
2.
Check Enable IP Address Filtering.
3.
Set Filtering Mode.
Blocklist Mode
The added IP addresses are not allowed to access the device.
Allowlist Mode
The added IP addresses are allowed to access the device.
4.
Add an IP address.
1) Click Add.
2) Enter the IP address.
3) Click Add.
Note
The IP address only refers to the IPv4 address.
5.
Oponal: Edit, delete, or clear the added IP addresses.
6.
Click Save.
Network Trac Camera (Mul-lens LPR Camera) User Manual
46

HIKVISION iDS-TCH44P-B Specifications

General

Brand	HIKVISION
Model	iDS-TCH44P-B
Category	Security Camera
Language	English