Figure 2-2 Acvaon Page
3.
Create a password and conrm it.
Note
You can click to enable or disable password reveal.
4.
Tap OK to acvate the indoor staon.
Note
We highly recommend you to create a strong password of your own choosing (using a minimum
of 8 characters, including at least three kinds of following categories: upper case leers, lower
case leers, numbers, and special characters) in order to increase the security of your product.
And we recommend you change your password regularly, especially in the high security system,
changing the password monthly or weekly can beer protect your product.
Aer
device acvaon, the wizard page will pop up.
2.2
Acvate via iVMS-4200 Client Soware
You can only congure and operate the indoor staon aer creang a password for the device
acvaon.
Before You Start
Default parameters of indoor staon are as follows:
Network Indoor Staon User Manual
4