Figure 3-17 General Sengs
Time and Date
Set the displayed me and date format, current me. Tap Sync Time to synchronize the device
me. Tap to enable Synchronize Time to Door Staon to synchronize the device me to the
linked door
staon. You can also enable DST and set the DST start me, end me and bias.
Note
For details, see Synchronize Time .
System Language
Tap System Language to change the system language.
Brightness Adjustment
Tap + or - to adjust the screen brightness.
Clean Screen
Enable Clear Screen and the screen will be locked for 30s. And you can clear the screen within
the
me duraon.
Note
●
Aer enabling Clear Screen funcon, press and hold the Unlock key to exit the clear screen
mode.
●
The device without unlock key will exit the clear screen mode automacally when the me is
out.
Network Indoor Staon User Manual
24