Before using the instrument for the first time, verify that it oper-
ates normally to ensure that no damage occurred during stor-
age or shipping. If you find any damage, contact your dealer or
Hioki representative.
Does the screen turn on when
the instrument is turned on?
The batteries may be dead.
Replace the batteries and try
again.
The instrument may be mal-
functioning. Have the instru-
ment repaired.
• Is the instrument damaged?
• Is the clamp sensor cracked
or otherwise damaged?
No
End of inspection
Yes
An error is
displayed.
• The screen is not on.
• The screen shows an
error.
Do not use the instrument if it
is damaged as doing so may
result in electric shock. Have
the instrument repaired.
Yes
1. Inspecting the instrument
2. Inspecting the instrument after turning it on
The screen is on.
Using the included resistance
check loop to inspect the instru-
ment (p.24)
To Next Page
Loading...
Need help?
General
