18
Installation MACH102
Release
06
09/2014
Media module M1-8SM-SC
The M1-8SM-SC media module has 8 FX ports for connecting terminal
devices or network segments in compliance with the IEEE 802.3u
100BASE-FX Singlemode standard. The optical ports are configured in
100 Mbit/s Fullduplex (FDX) and support FEFI. They have a DSC design.
Figure 8: Media module M1-8SM-SC
Media module M1-8SFP
The M1-8MM-SC media module has 8 FX ports for connecting terminal
devices or network segments in compliance with the IEEE 802.3u
100BASE-FX Multimode/Singlemode/Longhaul standard. The optical
ports are configured in 100 Mbit/s Fullduplex (FDX) and support FEFI.
They are designed as SFP slots for the Hirschmann SFP module types
M-FAST SFP-... 44 “Accessories”.
Figure 9: Media module M1-8SFP
1.1.3 SFP modules
SFP modules are optical transceivers (Fast ETHERNET and Gigabit
ETHERNET SFP modules, see 44 “Accessories”). SFP stands for Small
Form-factor Pluggable and is also frequently referred to as mini-GBIC
(GigaBit Interface Converter).
The SFP modules are plugged into the SFP slots of the MACH102 basic
device to obtain an F/O port. The MACH102 has 2 TP interfaces and 2 slots
for inserting SFP modules (100/1000 Mbit/s).
By inserting the SFP module you deactivate the corresponding TP interface.
Module type Transmission Range Connec-
tion
Fast ETHERNET SFP modules:LC
M-FAST SFP-MM / LC 1310 nm Multimode 4 km LC
Table 2: SFP modules
To Next Page
Loading...
Need help?
General
