Hirschmann MACH102 Series User Manual

26
Installation MACH102
Release 06 09/2014
Note: When operating the device in an environment with strong vibra-
tions, you have the option to additionally fasten the back of the device to
the switch cabinet using two brackets.
You can obtain additional brackets as accessories (see on page 44
“Accessories”).
 Mounting on the wall
 Use the pre-mounted brackets included in the delivery.
(see figure 17)
 Additionally attach two brackets to the back of the device.
(see figure 17)
You can obtain additional brackets as accessories (see on page 44
“Accessories”).
 Fasten the device by screwing the brackets to the wall.
CAUTION
OVERHEATING OF THE DEVICE
When installing the device, ensure that the ventilation slots are not covered.
Make sure there is at least 10 cm (3.94 in) of space.
Failure to follow these instructions can result in injury or equipment
damage.
CAUTION
OVERHEATING OF THE DEVICE
When installing the device, ensure that the ventilation slots are not covered.
Make sure there is at least 10 cm (3.94 in) of space.
Failure to follow these instructions can result in injury or equipment
damage.

Hirschmann MACH102 Series Specifications

General

Brand	Hirschmann
Model	MACH102 Series
Category	Switch
Language	English