16
1 2 3
gently
push
Using the remote Control
Installing batteries
Installing theremote control batteries
1. Slide openthe battery cover on the back of theremote control.
2. Install two AAA size(1.5V) batteries. Match the “+” and “-” signs on the batteries to thesigns on the battery
compartment.
3. Close the battery cover.
Note:
1. Dispose of your batteries inadesignateddisposal area. Do not throw the batteries i
nto fire.
2. Do not mix battery types or combine used batteries with newones.
3. Remove depleted batteries immediately to prevent batteryacidfrom leaking into the battery compartment.
4. If you do not intend to use theremote control for a long time, remove the batteries.
5. Theeffect
iverange of remote control is suggested inthe figure below.
Remote control range
1. Theremote control rangeis8meters infront of the TV set.
2. Theremote control angle: taking the television infraredlight receiver window as an apex,6meters
away, its
controlled angle (left to right) is within30degrees,while the vertical angle (up to down)is within15degrees.
To Next Page
Loading...
Need help?
General
