20
Tuning Type
Auto Tuning
DTV Manual Tuning
ATV Manual Tuning
Program Edit
Signal Information
DTV+ATV
CHANNEL
Changing the TV Settings
Using the Channel Menu
Ɣ Press [Menu] to open the main menu.
Ɣ Press [Ÿ/ź] to select Channel, then press [Ź/OK] to
enter the Channel menu.
Ɣ Press [Ÿ/ź] to select an option.
Ɣ Press [Ź/OK] to enter the submenu.
Ɣ Press [Menu] to return the up menu.
Ɣ Press [Exit] to exit
■ Tuning Type
● Press [▲/▼]toselect the Tuning Type.
● Press [◄/►]toselect DTV+ATV,DTV,ATV.
■ Auto Tuning
This is theeasiest and most effective way to install all channels availablein your area automatically.
-In both the
Analog and Digital signal source
● Press [▲/▼]toselect Auto Installing.
● Press [OK] start an automatic search, and this will memorize all the available channels.
Auto Tuning will take afewminutes;please wait until ithas finished.
■ DTV Manual Tuning
-In Digi
tal signal source
Digital channel numbers are different to theexisting analog channel numbers;please contact the broadcaster in
yourstate for more information.
● Press [▲/▼]toselect the DTV Manual Tuning, thenpress [OK] to enter DTV Manual Tuning menu.
● Press [◄/►]toselect a channelthenpress [OK] to search.
■ ATV Manual Tuning
-In Analog signal source
Manual Install is only neededwhen analogue channels are not found under an automatic tune.
● Press [▲/▼]toselect ATV Manual Tuning, thenpress [OK] to enter ATV Manual Tuning menu.
● Press [▲/▼]toselect search tenpress [◄/►]tobeing tuning.
● Stor
age - you can select the channel 1……100 .
● Colour System- youcanselect Colour System PAL,Colour System NTSC,Colour System SECAM.
● System- youcanselect SystemBG,SystemI,System DK,SystemL.
● Current CH - you can select CurrentCH1toCurrent CH 100.
● Search - Auto search the channel.
● Fine-Tune -F
ine adjusts frequency to achieve aperfect effect.
● Press theredbuttontosave the channel.
NOTE: System setting for Australia is B.
To Next Page
Loading...
Need help?
General
