To Next Page

To Previous Page

: If you are using an antenna with a 300 ohm twin-lead cable, you need to use a 300-75 ohm adapter (not

provided) to adapt the cable to a connecon that is compable with the TV’s antenna input.

: If you receive your TV staons through a set top box from a cable or satellite TV provider, connect it to the TV

using the best connecon method available. From most to least desirable:

• 

 – Digital HD and SD video

•  – analog SD video

•  – analog SD video using NTSC

Connecting a device with a composite AV video cable

If the best connecon available on your device is AV or composite video output, connect it to the TV using a composite

AV cable (not provided). Composite AV cables typically have three RCA-type plugs on each end, color coded as follows:

• Yellow: Video

• Red: Audio, right channel

• White or black: Audio, le channel

Connect each plug to the corresponding connector on the component and on the TV.

VIDEO

L R

- AUDIO -

AV IN

RESET

- AUDIO -HEADPHONE

AIR/CABLE

HDMI 4

HDMI 3

HDMI 2

LAN

HDMI 1

ARC)

SPDIF

USB