8
Connecting an AV receiver or digital sound bar
You can enjoy Dolby Audio
™
mulchannel sound from your TV if you connect a digital amplier or sound bar (not provid-
ed) in either of two ways:
• – Connect a TOSLINK opcal cable (not provided) from the TV to the Opcal
input on your receiver or sound bar.
• – Connect an HDMI cable (not provided) from the HDMI (ARC) connector to the HDMI input on your
receiver or sound bar. This connecon uses the Audio Return Channel (ARC) feature of the HDMI specicaon to
output sound from the TV to a compable device. To use this feature, you must congure the TV to enable HDMI
ARC, as explained in “Enabling HDMI ARC” on page 57.
Preparing for Internet connectivity
If you want to connect your TV to the Internet to watch streaming content, you can choose either a wireless or a wired
connecon.
• – To use a wireless connecon, make sure you know the name (SSID) and password you use
to connect to your wireless modem/router or wireless access point.
• – To use a wired connecon, plug your Ethernet cable into the RJ-45 jack on the back of the
TV. The wired connecon supports both 10 and 100 Base-T Ethernet
For wireless operaon, the TV connects through a built-in wireless LAN adapter. The TV does not support the use of a
USB network adapter.
: We recommend that your wireless connecon support IEEE 802.11 dual band capability for the best expe-
rience.
AC power
Plug your TV into a power outlet. You can tell that the TV has power because the status light on the front of the TV lights
up.
“Status light” on page 25 explains how the status indicator shows what is happening with the TV.
VIDEO
L R
- AUDIO -
AV IN
RESET
L
R
- AUDIO -
HEADPHON
CABLE
HDMI 4
HDMI 3
HDMI 2
LAN
HDMI 1
ARC)
SPDIF