35
Adjusting TV settings
You can adjust most picture and sound sengs while you are watching a program by pressing to display the
menu. If you don’t nd what you need, there are addional picture and sound sengs in the menu.
In most cases, the changes you make apply only to the input you are using. Antenna TV, each separate HDMI input, and
the AV input have their own sengs that the TV remembers when you return to that input. The TV also remembers the
sengs you specify while viewing streaming content.
Settings menu
Use the menu to adjust overall TV sengs. Press
to go to the screen, and then navigate to
.
You can adjust the following overall TV picture sengs from the :
• – If the lighng level in your TV room changes, use this seng to help provide a beer viewing
experience; set to darker for a darker room, and brighter for a brighter room. Choose among and four
other sengs to make the overall picture brighter or darker. So that you don’t have to make this type of change
for each TV input one at a me, this seng increases or decreases the TV’s general brightness across all TV
inputs. This seng is idencal to the TV brightness seng you can access in the Opons menu while watching a
program.
• – This secon of opons lists each TV input. Select an input to switch to that input. Then press
to display the menu, where you can adjust the input’s sengs while watching a live picture and lis-
tening to the sound from that input.
: You don’t have to go to the Sengs menu rst—you can display an input’s Opons menu and adjust its
sengs whenever you are watching the input by pressing .
To Next Page
Need help?
General
