13
Basic Operation
Power On/Off
To switch on the TV
1
Press the main power switch located on the
underside of the TV.
The power indicator lights in red, indicating
that the TV is in standby mode.
2
Press .
The power indicator lights in green and the
TV switches on.
To switch off the TV
1
Press .
The power indicator lights in red and the
TV switches off to standby mode.
2
Press the main power switch located on the
underside of the TV to completely power off
the TV.
• It takes approximately 15 seconds for the picture to
appear after the TV is turned on.
• The TV will switch to standby mode automatically if
there is no signal input for 15 minutes.
• If the TV will not be used for a long period of time,
unplug the TV from the wall socket outlet.
Input Source Selection
To select input source
1
Press .
2
Press / to select the desired input source
(DTV, TV, AV, COMPONENT, PC-RGB,
HDMI1, HDMI2 , HDMI3, HDMI4).
3
Press OK to set your selection.
Volume Adjustment
To change the volume
1
Press to increase the sound volume.
2
Press to decrease the sound volume.
To mute the sound
1
Press MUTE to temporarily turn off the sound.
2
Press MUTE or to restore the sound to
previous level.
• You can decrease the sound volume by pressing
while the sound is muted.
On-Screen
Display
(OSD)
Selection and
Adjustment
1
Press to display the main menu.
2
Press / to select a menu.
The selected menu page displays.
3
Press / or OK to set your selection.
4
Press / to choose an item on the menu
page.
5
Press / to adjust an item value or choose
options.
6
Press to return to the previous menu
screen, or press repeatedly to exit the
menu.
• The OSD menu screen will be closed automatically
when no operation has been made for a certain
time.
To Next Page
Loading...
Need help?
General
