13
Guided Setup
With the preliminaries out of the way, it’s me to turn on your TV. As the TV starts for the rst me, it leads you through
Guided Setup, which congures the TV before you start to use it.
During Guided Setup, you’ll:
• Answer a few quesons
• Provide network connecon informaon
• Get a soware update
• Link your TV to your Roku account.
• Connect devices such as a DVD player, game console, or cable box.
: Guided Setup runs only once, the rst me you turn on your TV. If you need to run Guided Setup again,
you’ll have to perform a factory reset, as explained in “Factory reset everything” on page 62.
Starting Guided Setup
To start Guided Setup, press the POWER buon on the remote control to turn on your TV.
When you rst turn on your TV, it will take a few seconds to get itself ready. You’ll noce the following things happening:
1. The status light blinks every me the TV is busy doing something; in this case it’s powering up and geng ready
for you.
2. The power-on screen appears and the status light blinks slowly for a few more seconds. The power-on screen
displays the Hitachi Roku TV logo while the TV starts up.
3. Aer a few seconds, Guided Setup starts:
: On TVs sold in the United States, if you are blind or visually impaired, you can acvate the Audio Guide, a
text-to-speech screen reader to help you navigate the TV’s menus and commands.
To enable the Audio Guide, press the buon on the remote control four mes in rapid succession. Repeat
to disable the Audio Guide. (The buon is located directly below the direconal pad on the right side of the
Roku remote control.)
To Next Page
Loading...
Need help?
General
