4-11
When steering on a slope, lower the loader front to increase
the machine stability. Do not steer on a steep slope. Failure to
do so may possibly causeg the machine to turn over.
When descending a slope, travel the machine in the slow drive
gear range using sufficient engine braking.
In case the engine stalls on a slope, immediately step on the
brake pedal as strongly as possible, lower the loader front to
the ground and stop the machine. After moving the forward/
reverse selector lever to neutral, restart the engine.
The parking brake is automatically applied when the engine
stops. Turn the parking brake switch ON before restarting the
engine.
• Before descending a slope, confirm that the brake system
works normally by operating the brake pedal.
• In case the hydraulic oil and lubricant temperatures are
low, the machine gradeability may decrease. Before
climbing a steep slope, sufficiently perform the warm up
operation of the machine.
To Next Page
Loading...
Need help?
General
