Hitachi ZW220 User Manual


5-19

1. After finishing the day’s operation, drive the machine to
a firm, level ground where no possibility of falling stones,
ground collapse, or floods are present.
Park the machine referring to the “PARKING THE MA-
CHINE” in the “DRIVING THE MACHINE” section.
2. Refill the fuel tank.
3. Clean the machine.
4. If anti-freeze or long life coolant is not used in cold
weather, be sure to drain coolant from the radiator and
the engine jacket. Also, be sure to put a “No Water in Ra
-
diator” tag in a visible place after the coolant has been
drained.
5. Maintenance for long term machine storage after engag
-
ing in snow removal
Anti-freeze agents such as salt (sodium chloride or cal-
cium chloride) are scattered on snow roads. When the
machine is stored for a long time after engaging in snow
removal work, perform the following maintenance to
protect the machine from being corroded and/or dam-
aged by salt.
5.1 Clean the machine thoroughly. Clean each cylinder rod
(plated areas) and the radiator with extra care.
 




5.2 After positioning the machine for storage, carefully coat
each cylinder rod (plated areas) and the control valve
spools with rust-preventive oil.
5.3 Lubricate all pins while referring to A Greasing Section
in the Maintenance Guide List.
 



5.4 Remove the batteries and store them in a dry cool place.
When the batteries are not removed, disconnect the
ground terminal cable.
M4GB-05-021
+24V
(Red Vinyl Cap )
Ground Side
(Black Vinyl Cap)
(Red Vinyl Cap )

Hitachi ZW220 Specifications

General

Brand	Hitachi
Model	ZW220
Category	Compact Loader
Language	English