5-4
Front control lever lock (1) is provided to prevent the machine
is unexpectedly operated even if the operator mistakenly
comes in contact with the bucket and/or lift arm control lever
when getting on or off the machine. When the lever lock is
placed to position (2), the front control lever becomes oper
-
able.
• When leaving the operator’s seat:
1. Park the machine on solid level ground. Lower the bucket
to the ground. Return all levers to neutral. Stop the en
-
gine.
2. Pull lock side (3) of front control lever lock (1) downward
to move the front control lever lock to the LOCK position.
• When starting operation:
• Before starting operation:
Before starting operation, check that front control lever
lock (1) is in the UNLOCK position (2).
M4GB-01-050
UNLOCK LOCK
To Next Page
Loading...
Need help?
General
