EasyManuals Logo
Home>Hitachi>Compact Loader>ZW220

Hitachi ZW220 User Manual

Hitachi ZW220
334 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #290 background imageLoading...
Page #290 background image

7-90
M4GB-07-105
M4GB-07-106
M4GB-07-107











 


 
 


1. Remove the filter:
The fresh air filter is installed behind cover (1) on the
left rear side of the cab exterior. Open cover (1) with the
starter key. Press the under side of angle (2) and remove
notch (4) from stopper (3). Slide the angle toward the left
side. After raising angle (2), remove fresh air filter (5).
2. Clean fresh filter (5) using compressed air or by washing
with water. Washing procedure with water is as follows:
2.1 Use tap water.
2.2 Submerge the filter in water containing a neutral deter
-
gent for about 5 minutes.
2.3 Clean the filter with water again.
2.4 Sufficiently dry the filter.
3. Install the cleaned fresh air filter or a new filter by follow
-
ing the filter removal procedure described in step 1 in the
reverse order.
Press
1

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Hitachi ZW220 and is the answer not in the manual?

Hitachi ZW220 Specifications

General IconGeneral
BrandHitachi
ModelZW220
CategoryCompact Loader
LanguageEnglish

Related product manuals