1-27
Changes the machine drive direction from forward to re
-
verse and vice versa. Move forward/reverse lever (1) to the
F position to travel the machine forward. Move forward/re-
verse lever (1) to the R position to drive the machine in re-
verse.
NOTE: The engine will not be started if forward/reverse switch
(3) and the forward/reverse lever (1) are not in the neu
-
tral position. Refer to page 1-56 for forward/reverse
selector switch (4).
A desired transmission gear stage can be selected by turn
-
ing shift switch (2).
Forward: 4 Stages
Reverse: 3 Stages ZW220/ZW250 (ZW180/ZW310: 4 stages)
While driving the ZW220 or the ZW250 in reverse, even
though shift switch (2) on the ZW220 or the ZW250 is
turned to the forth gear position, the travel speed remains
unchanged from that in the third gear stage. Select the
drive gear stage matching the operational conditions.
M4GB-01-050
M4GB-01-044
M4GB-01-042
Finger Type
Multi-Function Type
To Next Page
Loading...
Need help?
General
