Honda 2004 XR400R User Manual

(2)
(3)
(5)
(4)
RIGHT FRONT
(1)
(3)
(3)
(3)
(4) axle holder
(5) front axle
(1) tripmeter cable set screw
(2) tripmeter cable
(3) axle holder nuts
113
Front Wheel Removal
Servicing Your Honda
Wheels
Rotate the wheel slowly to see if it appears
to ‘‘wobble.’’ If it does, the rim is out of
round or not ‘‘true.’’ If the wobble is
noticeable, see your Honda dealer for
inspection.
Removal
Raise the front wheel off the ground by
placing a maintenance stand or support block
under the engine. Secure the rear of the
motorcycle with tie-down straps.
Remove the front axle holder nuts ( ) and
the front axle holder ( ).
Unscrew and remove the axle ( ). Remove
the wheel.
Avoid depressing the brake lever and brake
pedal when the wheel is off the motorcycle.
This will force the caliper pistons out of the
cylinders. The result will be loss of brake
fluid. If this occurs, the brake system will
require service. See your Honda dealer for
this service.
Remove the tripmeter cable set screw ( )
and disconnect the tripmeter cable ( ).
(cont’d)
1.
2.
3.
3.
4.
4
3
2
1
5
03/05/20 10:13:46 31KCY680_122

Honda 2004 XR400R Specifications

General

Displacement	397 cc
Cooling System	Air-cooled
Bore x Stroke	85.0 mm x 70.0 mm
Compression Ratio	9.3:1
Transmission	5-speed
Front Brake	Single disc
Rear Brake	Single disc
Ignition	CDI
Front Tire	80/100-21
Rear Tire	110/100-18
Engine Type	Air-cooled 4-stroke single cylinder
Front Suspension	43mm telescopic fork
Rear Suspension	Pro-Link single shock
Induction	Carburetor
Ground Clearance	12.4 inches