25
Is Your Motorcycle Ready to Ride?
Before Riding
Engine Oil
Fuel
Spark Plug
&Cap
Throttle
Brakes
Nuts &
Bolts
Cables
Drive Chain
Check the level and add oil if
needed (page ).
Check the level and add fuel
(page ) if needed. Also make
sure the fuel fill cap is securely
fastened.
Check these items after you get on the
motorcycle:
Check the freeplay and adjust if
needed. Rotate the throttle to
make sure it moves smoothly
without sticking, and snaps shut
automatically when it is released,
in all steering positions
(page ).
Squeeze the front brake lever
and step on the rear brake pedal
to check that the controls
operate normally. Check for
proper freeplay (page ).
Check for looseness (page ).
Useawrenchtomakesureall
accessible nuts, bolts, and
fasteners are tight.
Check the cable housings for
wear. Check the fittings for
looseness. Replace or tighten as
needed.
Check the condition and slack.
Adjust and lubricate if needed.
Also check the chain guide
slider and slipper for wear and
replace if needed (page ).
(cont’d)
61
123
107
67
84
77
03/05/20 09:59:52 31KCY680_034
To Next Page
Loading...
Need help?
General
