Honda CLICK160 User Manual

Overheating (High coolant temperature indicator is on)
The engine is overheating when the following
occurs:
● High coolant temperature indicator
comes on.
● Acceleration becomes sluggish.
If this occurs, pull safely to the side of the
road and perform the following procedure.
Extended fast idling may cause the high
coolant temperature indicator to come on.
NOTICE
Continuing to ride with an overheated engine
can cause serious damage to the engine.
1. Stop the engine using the ignition switch.
2. Allow the engine to cool with the ignition
switch in the (Off) position.
3.
After the engine has cooled, inspect the
radiator hose and check if there is a leak.
2 P. 94
If there is a leak:
Do not start the engine. Transport your
vehicle to your dealer.
4. Check the coolant level in the reserve
tank. 2 P. 94
u
Add coolant as necessary.
5. If 1-4 check normal, you may continue
riding, but closely monitor the high
coolant temperature indicator.
20220404183646_32K2SD000_eng_BOOK Page 111 Monday, April 04 2022 18:39:28 JST
Troubleshooting
108

Honda CLICK160 Specifications

General

Displacement	156.9 cc
Fuel System	PGM-FI (Programmed Fuel Injection)
Transmission	Automatic, V-Matic
Front Suspension	Telescopic Fork
Fuel Capacity	5.5 liters
Ignition	Full Transistorized
Starter	Electric
Seat Height	778 mm
Ground Clearance	138 mm
Engine Type	4-stroke, liquid-cooled
Front Brake	Hydraulic Disc
Rear Brake	Drum
Bore x Stroke	60.0 mm x 55.5 mm
Compression Ratio	12:1
Rear Tire	120/70-14 M/C 61P
Length x Width x Height	1, 929 mm x 1, 088 mm
Front Tire	100/80-14 M/C 48P