Honda CLICK160 User Manual

To activate the system, “Setting the Anti-theft
Alarm System.” 2 P. 43
For proper handling of the battery, see
“Maintenance Fundamentals.” 2 P. 79
“Battery Goes Dead.” 2 P. 123
Clip
#
Removal
1. Press down on the centre pin to release
the lock.
2.
Pull the clip out of the hole.
#
Installation
1. Push the bottom of the centre pin.
2. Insert the clip into the hole.
3. Press down on the centre pin to lock the
clip.
20220404183646_32K2SD000_eng_BOOK Page 93 Monday, April 04 2022 18:39:28 JST
Removing & Installing Body Components u Clip
Maintenance
90
Centre pin

Honda CLICK160 Specifications

General

Displacement	156.9 cc
Fuel System	PGM-FI (Programmed Fuel Injection)
Transmission	Automatic, V-Matic
Front Suspension	Telescopic Fork
Fuel Capacity	5.5 liters
Ignition	Full Transistorized
Starter	Electric
Seat Height	778 mm
Ground Clearance	138 mm
Engine Type	4-stroke, liquid-cooled
Front Brake	Hydraulic Disc
Rear Brake	Drum
Bore x Stroke	60.0 mm x 55.5 mm
Compression Ratio	12:1
Rear Tire	120/70-14 M/C 61P
Length x Width x Height	1, 929 mm x 1, 088 mm
Front Tire	100/80-14 M/C 48P