44
OPERATION
AC Parallel Operation Applications
Two EU70is generators can be connected together to increase the
available power using a parallel kit (optional equipment).
Follow the instructions included with the parallel kit.
Before connecting an appliance or power cord to the generator:
• Make sure that it is in good working order. Faulty appliances or
power cords can create a potential for electrical shock.
• If an appliance begins to operate abnormally, becomes sluggish, or
stops suddenly, turn it off immediately. Disconnect the appliance,
and determine whether the problem is the appliance or the rated load
capacity of the generator has been exceeded.
• Never connect different generator models.
• For parallel operation, use only a Honda approved parallel kit (optional
equipment) when connecting one EU70is to another EU70is
generator.
• Never connect or remove the parallel operation cable when the
generator is running.
• For single generator operation, the parallel operation cable must be
disconnected from both generators.
36Z376000.book 44 ページ ２０１４年９月１９日 金曜日 午後６時２６分
To Next Page
Loading...
Need help?
General
