84
ASSEMBLY
Battery
Battery posts, terminals, and related accessories contain lead and lead
compounds. Wash hands after handling.
The battery is disconnected and strapped into the battery tray for
shipment.
1.Remove the battery maintenance cover (see page 63).
2.Remove the battery strap from the bottom hook, and then remove
the battery.
3.Only remove the battery cables from the twist clip.
Make sure that the 4-pin blue coupler harness is secured with the
twist clip.
Charge the battery properly. See page 65.
Reinstall the battery.
4.Remove the protective cover from the battery positive (+) terminal,
and connect the positive (+) cable to the battery positive (+)
terminal. Make sure to cover the terminal with the battery boot.
5.Connect the negative (–) cable to the battery negative (–) terminal.
6.Secure the battery by hooking the strap onto the bottom hook of the
generator.
7.Install the battery maintenance cover in the reverse order of removal
(see page
63).
Never operate the generator with the battery maintenance cover
open, as poor engine and generator performance will result.
TWIST CLIP
BOTTOM
HOOK
4-PIN BLUE COUPLER HARNESS
BATTERY CABLES
NEGATIVE (–) CABLE
BATTERY STRAP
BATTERY
POSITIVE (+) CABLE
BATTERY BOOT
36Z376000.book 84 ページ ２０１４年９月１９日 金曜日 午後６時２６分
To Next Page
Loading...
Need help?
General
