EasyManuals Logo

Honda GC160 User Manual

Honda GC160
56 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #23 background imageLoading...
Page #23 background image
SERVICING YOUR ENGINE
MAINTENANCE SAFETY
Some of the most important safety precautions follow. However, we
cannot warn you of every conceivable hazard that can arise in
performing maintenance. Only you can decide whether or not you
should perform
a
given task.
Failure to properly follow
maintenance instructions and
precautions can cause you to be
seriously hurt or killed.
Safety Precautions
Make sure the engine is off before you begin any maintenance or
repairs. This will eliminate several potential hazards:
-Carbon monoxide poisoning from engine exhaust.
Be sure there is adequate ventilation whenever you operate the
engine.
Let the engine and exhaust system cool before touching.
Do
not run the engine unless instructed to do
so.
-Burns from hot parts.
-Injury from moving parts.
Read the instructions before you begin, and make sure you have the
tools and skills required.
To
reduce the possibility of fire or explosion, be careful when
working around gasoline. Use only
a
nonflammable solvent, not
gasoline, to clean parts. Keep cigarettes, sparks and flames away
from all fuel-related parts.
Remember
that
your servicing dealer knows your engine best and is
fully equipped to maintain and repair
it.
To ensure
the
best quality and reliability, use only new, genuine
Honda parts or their equivalents for repair and replacement.
21

Other manuals for Honda GC160

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Honda GC160 and is the answer not in the manual?

Honda GC160 Specifications

General IconGeneral
Engine TypeAir-cooled 4-stroke OHV
Bore x Stroke68 mm x 45 mm
Compression Ratio8.5:1
PTO Shaft RotationCounterclockwise (from PTO shaft side)
Ignition SystemTransistorized magneto ignition
Lubrication SystemForced splash
Net Torque10.3 Nm (7.6 lbs ft) @ 2, 500 rpm
Fuel Consumption1.4 L/h at 3, 600 rpm
Starting SystemRecoil start
Fuel Tank Capacity3.1 liters
Oil Capacity0.58 liters
Dry Weight15.1 kg
Displacement160 cm3 (9.8 cu-in)

Related product manuals