Honda GC160 User Manual

TECHNICAL & CONSUMER INFORMATION
Specifications
GC135-QHA Type
Length X Width X Height
13.0
X 14.5 X 12.4 in
(330
X 369 X 315 mm)
Dry weight
4-stroke, overhead cam, single cylinder
Engine type
24.7 Ibs (1 1.2 kg)
8.2 cu-in (1 35 cm3)
Displacement
[Bore
X Stroke]
3.9 bhp (2.9 kW, 4.0 PS)
at 3,600 rpm
Max. output
[ 2.5 X 1.7 in (64 X 42 mm) ]
Counterclockwise
PTO shaft rotation
Transistorized magneto
Ignition system
Forced air
Cooling system
~~ 0.51 Ib/hph (313 g/kWh, 230 g/PSh)
Fuel consumption
6.4 Ibf.ft (8.6
N.m, 0.88 kg.m) at 2,500 rpm
Max. torque
GC160-QHA Type
I Length X Width X Height
13.3
X 14.5 X 13.0 in
(337
X 369 X 331 mm)
Dry weight
Engine type
Displacement
4-stroke, overhead cam, single cylinder
Counterclockwise
PTO shaft rotation
Transistorized magneto
Ignition system
Forced air
Cooling system
0.51 Ib/hph (313 g/kWh, 230 g/PSh)
Fuel consumption
7.6 Ibf-ft (10.3 N.m, 1.05 kg.m) at 2,500 rpm
Max. torque
4.9 bhp (3.7 kW, 5.0 PS) at 3,600 rpm
Max. output
[ 2.5 X 2.0 in (64 X 50 mm) ]
[Bore X Stroke]
9.8 cu-in (160 cm3)
-
25.4 Ibs (11.5 kg)
Tuneup
SPECIFICATION
(0.70-0.80 mm)
Refer to page: 31
0.028-0.031 in
MAINTENANCE
Valve clearance (cold)
No other adjustments needed.
Other specifications
See your authorized
IN: 0.1510.04 mm
EX: 0.20+0.04 mm
Honda dealer

Honda GC160 Specifications

General

Engine Type	Air-cooled 4-stroke OHV
Bore x Stroke	68 mm x 45 mm
Compression Ratio	8.5:1
PTO Shaft Rotation	Counterclockwise (from PTO shaft side)
Ignition System	Transistorized magneto ignition
Lubrication System	Forced splash
Net Torque	10.3 Nm (7.6 lbs ft) @ 2, 500 rpm
Fuel Consumption	1.4 L/h at 3, 600 rpm
Starting System	Recoil start
Fuel Tank Capacity	3.1 liters
Oil Capacity	0.58 liters
Dry Weight	15.1 kg
Displacement	160 cm3 (9.8 cu-in)