Name: Honda Outboard Motor BF15A
Brand: Honda
Rating: 4 (1 reviews)

To Next Page

To Previous Page

4. PRE-OPERATION CHECKS

1. Engine Oil Level

CAUTION:

Engine oil is a major factor affecting engine performance and service life.

Nondetergent and low quality oils are not recommended, because they

have inadequate lubricating properties.

Running the engine with insufficient oil can cause serious engine

damage.

UsB Honda 4-stroke oil or an

equivalent high detergent, premium

quality motor oil certified to meet or

exceed U.S. automobile manufac-

turer’s requirements for Service

Classification SF. Motor oils clas-

sified SF will show this designation

on the container.

Select the appropriate viscosity for

the average temperature in your area.

SAE low-30 is recommended for

general, all-temperature use.

-& -50 -io b lb ’ ’ 20

30 4O’C

1. Position the outboard motor vertically, and remove the engine cover by

pushing down the engine cover lock lever.

2. Remove the oil level dipstick and wipe with a clean rag.

3. Reinsert the dipstick all the way in, then pull it out and read the level. If

near or below the lower level mark, remove the oil filler cap and fill to the

upper level mark with the recommended oil. Tighten the oil filler cap

securely.

4. Install the engine cover and lock it securely by pulling up lock lever.

OIL CAPACITY: 1.1 ! (1.2 US qt)

NGINE COVER LOCK LEVER

OIL FILLER CAP

Questions and Answers:

Need help?

Do you have a question about the Honda Outboard Motor BF15A and is the answer not in the manual?

Honda Outboard Motor BF15A Specifications

General