Name: Honda Outboard Motor BF15A
Brand: Honda
Rating: 4 (1 reviews)

To Next Page

To Previous Page

Gear Oil Check/Change

Oil Level Check

Check the oil level when the engine is in the vertical position. Remove the

level screw and see if oil flows out. If no oil comes out, fill through the drain

scerw hole until the oil starts to flow out through the level screw hole. If

there is water in the oil, the water will flow out first when the drain screw is

removed, or the oil will be a milky color.

Oil Change

Remove the level screw and drain screw to drain the oil. Inject oil through

the drain screw hole until it starts flowing out through the level screw hole.

Reinstall and tighten the level screw and drain screw securely.

CAUTION: If water is detected in the oil, the unit should be inspected by

an authorized Honda Outboard Motor dealer.

Recommended Oil: API standard (GL-4 or GL-5)

SAE 90 outboard motor gear oil

OIL CAPACITY: 0.24 e (0.51 US pt)

Starter Rope Check

Check the starter rope

board motor operation.

every 6 months or after every 100 hours of out-

Replace the rope if it becomes frayed.

STARTER ROPE

Questions and Answers:

Need help?

Do you have a question about the Honda Outboard Motor BF15A and is the answer not in the manual?

Honda Outboard Motor BF15A Specifications

General