Name: Honda Outboard Motor BF15A
Brand: Honda
Rating: 4 (1 reviews)

To Next Page

To Previous Page

2. Fuel Level

Check the fuel gauge and refill the tank if.the fuel level is low.

NOTE: Open the vent knob b’efore removing the fuel filler cap. When the

vent knob is firmly clbsed, the cap will be difficult to remove.

Your engine is designed to use any gasoline that has a pump oc-

tane number lR + M, of 86 or higher, or that has a research octane number

of 91 or higher.* Gasoline pumps at service station normally display the

pump octane number.

We recommend that you use unleaded fuel because it produces fewer

engine and spark plug deposits and extends the life of exhaust system

components.

Never use stale or contaminated gasoline or an oil/gasoline mixture. Avoid

getting dirt, dust or water in the fuel tank. Use of a lower octane gasoline

can cause persistent “pinging” or heavy “spark knock” (a metallic rapping

noise) which, if severe, can lead to engine damage.

CAUTION: If “spark knock” or “pinging” occurs at a steady engine speed

under normal load, change brands of gasoline. If spark knock or pinging

persists, consult your authorized Honda dealer. Failure to do so is con-

sidered misuse, and damage caused by misuse is not covered by Honda’s

Limited Warranty.

Occasionally you may experience light spark knock while operating under

heavy loads. This is no cause for concern, it simply means your engine is

operating efficiently.

Fuel tank capacity: 13 P (3.4 US gal)

FUEL GAUGE

After refueling, be sure to tighten the fuel tank cap firmly.

Questions and Answers:

Need help?

Do you have a question about the Honda Outboard Motor BF15A and is the answer not in the manual?

Honda Outboard Motor BF15A Specifications

General