Honda VFR1200F User Manual

115
Information
Storing Your Motorcycle
Avoid getting gasoline, brake fluid, or
●
detergents on the instruments, windscreen,
panels, or headlight.
Exhaust Pipe and Muffler
The exhaust is made of stainless steel, which
can become tarnished with burn marks if
splattered with oil or other substances when
hot. To remove burn marks, use a mild abrasive
compound. To remove dirt and mud, use a
kitchen cleaning solution for stainless steel and
wash with a soft sponge. Rinse with plenty of
water to remove all residue.
NOTICE
Even though the exhaust is made of stainless steel, it can
become stained. Remove all marks and blemishes as
soon as they are noticed.
Storing Your Motorcycle
If you store your motorcycle outdoors, you
should consider using a full-body motorcycle
cover.
If you won’t be riding for an extended period,
follow these guidelines:
Wash your motorcycle and wax all painted
●
surfaces (except matte painted surfaces).
Coat chrome pieces with rust-inhibiting oil.
Place your motorcycle on a maintenance
●
stand and position a block so that both tires
are off the ground.
After rain, remove the body cover and allow
●
the motorcycle to dry.
Remove the battery to prevent discharge.
●
Charge the battery in a shaded, well-
ventilated area.
a
If you leave the battery in place,
disconnect the negative
terminal to
prevent discharge.
31MGE601.indb 115 2010/03/08 18:05:53

Honda VFR1200F Specifications

General

Bore and Stroke	81mm x 60mm
Compression Ratio	12.0:1
Ignition	Computer-controlled digital transistorized with electronic advance
Transmission	6-speed
Final Drive	Shaft
Front Tire	120/70 ZR17 radial
Rear Tire	190/55 ZR17 radial
Wheelbase	60.8 inches
Seat Height	32.1 inches
Fuel Capacity	4.9 gallons
Engine Type	1, 237cc liquid-cooled 76° V-4
Fuel System	PGM-FI
Front Suspension	43mm inverted cartridge fork with spring preload adjustability; 4.7 inches travel
Rear Suspension	5.1 inches travel
Front Brake	Dual 320mm discs with 6-piston calipers, ABS
Rear Brake	276mm disc with 2-piston caliper, ABS
Curb Weight	591 pounds (Includes all standard equipment, required fluids and full tank of fuel—ready to ride)