Honda VFR1200F User Manual

71
Maintenance
Coolant
Checking the Coolant
1. Place your motorcycle on a firm, level
surface.
2. Hold your motorcycle in an upright
position.
3. Check that the coolant level is between
the upper and lower level marks in the
reserve tank from the inspection window.
If the coolant level is dropping noticeably or
the reserve tank is empty, you likely have a
serious leak. Have your motorcycle inspected
by your dealer.
❙
Recommended Coolant
Pro Honda HP is a pre-mixed solution of
antifreeze and distilled water.
Concentration:
50% antifreeze and 50% distilled water
A concentration of antifreeze below 40%
will not provide proper corrosion and cold
temperature protection. A concentration of
up to 60% will provide better protection in
colder climates.
NOTICE
Using coolant not specified for aluminum engines or
using ordinary tap water can cause corrosion.
Reserve tank
Inspection
window
Reserve tank
cap
Upper level
Lower level
31MGE601.indb 71 2010/03/08 18:05:47

Honda VFR1200F Specifications

General

Bore and Stroke	81mm x 60mm
Compression Ratio	12.0:1
Ignition	Computer-controlled digital transistorized with electronic advance
Transmission	6-speed
Final Drive	Shaft
Front Tire	120/70 ZR17 radial
Rear Tire	190/55 ZR17 radial
Wheelbase	60.8 inches
Seat Height	32.1 inches
Fuel Capacity	4.9 gallons
Engine Type	1, 237cc liquid-cooled 76° V-4
Fuel System	PGM-FI
Front Suspension	43mm inverted cartridge fork with spring preload adjustability; 4.7 inches travel
Rear Suspension	5.1 inches travel
Front Brake	Dual 320mm discs with 6-piston calipers, ABS
Rear Brake	276mm disc with 2-piston caliper, ABS
Curb Weight	591 pounds (Includes all standard equipment, required fluids and full tank of fuel—ready to ride)