D indicator
Comes on when the D mode is selected in the AT MODE.
P.38
S indicator
Comes on when the S mode is selected in the AT MODE.
P.38
Gear position indicator
The gear position is shown in the gear position indicator when the D, S mode or MT MODE
are selected.
a
“
-
” appears for a few seconds and then goes off when the engine starts.
a
“
-
” flashes when the engine stop switch position is changed from RUN to OFF with the
ignition switch ON.
a
“
-
” flashes when the ignition switch is turned ON with the engine stop switch OFF.
The indicator may flash if:
a
The front wheel leaves the ground.
a
You turn the wheel while the motorcycle is upright on the stand.
This is normal. To operate the system again, turn the ignition switch OFF, then ON again.
If the “-” indicator is blinking in the gear position window while riding:
P.93
31MGE601.indb 25 2010/03/08 18:05:25
To Next Page
Loading...
