Honeywell Design and Application User Manual

Section 17 - Retrofit and Upgrades
199 Honeywell Economizers 63-8594-02
Cross Reference
Any Honeywell economizer can be upgraded to use the latest economizer models with the
added options of Demand Control Ventilation, exhaust fan set point or fault detection and
diagnostics system shutdown. See below for cross reference and upgrade options for the
economizer modules and sensors.
Sensors
Temperature
CO
2
Sensor Comments Can be replaced with
C7046A1004 Standard with 8 in probe
C7046A1012 OEM Carrier
#HH88AW010 C7046A1004
C7046A1020 OEM York #025-22625 C7046A1004
C7046A1038 C7046A1038 has 12 inch probe
C7046A1046 OEM Rheem with 24 inch leads
C7150B1004 Standard 3k ohm @ 70°F
C7150B1020 OEM Carrier 3750 @ 70°F #HH79AZ001 C7150B1004
C7150B1038 Standard 3750 @ 70°F
used with W957F C7150B1004
C7150B1046 Standard 10k @ 70°F
used with W7340
C7660A1000 Standard
C7660A1008 Carrier C7660A1000
C7650A1001 Standard use only with differential dry bulb for single dry
bulb use C7660A1000
C7650A1027 OEM Carrier use only with differential dry bulb for single
dry bulb use C7660A1000
C7650A1001
Sensor Comments Can be replaced with
C7232A1008 Wall with display, 1 relay out with Honeywell logo C7232A1016
C7232A1016 Wall no display, 1 relay out with Honeywell logo C7232A1008
C7232A1024 Wall with display, 1 relay out, no Honeywell logo C7232A1008
C7232A1032 Wall no display, 1 relay out, no Honeywell logo C7232A1016
C7232A1057 Wall with display, 1 relay out, Honeywell logo,
220 Vac, on-off
none
C7232B1006 Duct with display, 1 relay and 1 analog out with Honeywell logo C7232B1014
C7232B1014 Duct no display, 1 relay and 1 analog out C7232A1008
C7232B1022 Duct with display, 1 relay and 1 analog out, no Honeywell logo C7232B1006
C7232B1030 Duct no display, 1 relay and 1 analog out, no Honeywell logo C7232B1014
C7262A1008 Wall with display, 1 relay and 1 analog out C7262A1016
C7262A1016 Wall no display, 1 relay and 1 analog out C7262A1008
C7632A1004 Wall no display, with Honeywell logo, 1 analog out
C7632B1002 Duct no display, with Honeywell logo, 1 analog out

Honeywell Design and Application Specifications

General

Brand	Honeywell
Model	Design and Application
Category	Controller
Language	English