Honeywell Design and Application User Manual

Section 5 - M74XX Black Motor
63-8594-02 Honeywell Economizers 50
M7215, M7415, M7405 and M8405 Actuators
M7215 modulating motor,
with 2-10 Vdc input required.
The M7XXX line of spring return actuators are:
• Low torque 25 lb-in. (2.8 N-m)
• 90 second timing in 90 degrees travel
• Rotation of 90 degrees
• Quick connect terminals for wiring
connections
There are more actuators available in this
series than listed on this page. Only actuators
shown on this page are used with the W7459,
W7210, W7212, W7215, W7220 and W7340
economizer modules. They are widely used to
modulate the mixed air dampers on smaller
rooftop air handlers since the operating
temperature rating is -25 to 125°F
(-32 to 52°C).
M7215 modulating motor. Used with
W7212, W7213, W7214 or W7220 only
M7415 modulating motor, sensor
input or controller required.
Used with W7459A or D only.
NOTE: Using a black motor with a sensor for
economizer changeover is no longer
an acceptable method of economizer
control in ASHRAE 90.1, IECC, ICC
and CA Title 24. Systems with this
type of changeover should be updated
M23890
W7459A
M7415
TR
TR1
T
T1
P1
P
TR
TR1
T
P1
P
24 VAC
SENSOR
MIN
POS
T1
M13856A
TR
TR1
T1
P1
P
24 VAC
SENSOR
MIN
POSN
T
M23891

Honeywell Design and Application Specifications

General

Brand	Honeywell
Model	Design and Application
Category	Controller
Language	English