Introduction
Domonial is a wireless control panel with a built-in siren, digital communicator and audio
verification system. The radio link between the various components of the system allows easy
installation with only a small amount of cabling (mains, and when specified, PSTN, X10 or a wired
intercom terminal). This version can be used with the HF and the M wireless device ranges, for
example DO800M.
After recording a wireless Audio device, all HF wireless device can not work your installation.
Domonial can be programmed using the following tools:
DOMOPC programming tool. Refer to the DOMOPC online help guide for full details.
A TCU keypad
This guide describes how to program the panel using a TCU keypad. A complete list of
programming codes is provided at the end of this manual.
Panel Label
Commercial reference
Product file reference
Serial number Note: The format of
Date of manufacture date is yymmdd
The software version number is marked on a label on the box containing the panel (e.g. SW: L06) and
on a small label on the PCB.
The LED Indicators
The panel comes in two designs, depending on the version. Both designs have LED indicator lights
showing the status of the system.
LED latout for the classic version
To Next Page
Loading...
Need help?
General
