Fire Alarm Control Panel IQ8Control C / M
FB 798951.10.GB0 / 04.15 5
1 General / Application
This installation manual describes how to assemble the housing, install within a building and how to install a fire
alarm system IQ8Control panel. The instructions form part of the fire alarm system (FAS) and should be kept in
an accessible location in the immediate vicinity of the fire alarm control panel (FACP).
The information and technical specifications detailed in this documentation should enable an experienced fire
alarm specialist to assemble and install the FACP quickly and safely. Relevant knowledge, skills and qualifications
are required. These instructions must be read through carefully and understood before any work is commenced.
Proper assembly and installation, as well as safe working conditions, require compliance with all specified safety
and operating information in these instructions, as well as a correctly planned FAS that conforms to the applicable
standards and guidelines.
All other applicable documentation must be taken into consideration when designing, commissioning and
servicing the fire alarm system.
Object-specific design and planning documents for the FAS and local requirements must be observed.
Associated Documents
798950.10.GB0 Operation instruction FACP IQ8Control
798361.10 Brief instruction FACP IQ8Control
798952 Open Source Information - FACP IQ8Control
Online help for the tools 8000 programming software
FAS installer
Installers are a qualified electricians who, due to their professional training, are adequately qualified to install fire
alarm systems and are also familiar with the requirements of hazard alarm systems and telecommunications.
The FAS installer installing this system understands and implements the planning and project specifications for
this fire alarm system and assesses the implementation of the individual work steps and recognises potential
hazards.
System operator / trained person
A 'trained person' is an individual that has been trained in the performance of the operations required to operate
a fire alarm system (FAS) or hazard alarm system (HAS). This training must have been provided by a specialist.
The trained person must be able to independently operate the system's basic functions, able to ascertain that the
system is working properly, and initiate remedial action in case of irregularities or defects.
To Next Page
Loading...
Need help?
General
