MOUNTING
Humidifier Control Installation
Humidifier 69-2413EF—01
12
OPTION TWO: Remote Installation of H8908 Humidistat (provided)
If a different control is being used, refer to installation instructions provided with that control.
Choose a location in the living area. Select a location
clear of drafts or excessive humidity. Avoid mounting
near doors or windows, or in bathrooms or kitchens.
Cut 1-in. diameter wire hole in wall.
Run two-fan, low-voltage wire to the mounting location
in the living area.
Remove the base bracket from the humidistat.
Secure the base bracket to the remote location with
two 1-in. (25 mm) screws (provided).
2
2
4
1
3
To Next Page
Loading...
Need help?
General
