Setup
______________________________________________________________________________________________
32
System Configuration Continued
Use DST – After completing the Time Zone setup, highlight USE DST and
press ENTER to turn Daylight Saving Time ON / OFF.
NTP – Highlight NTP (Network Time Protocol) and press ENTER to SYNC the
DVR with the Network Time.
Keypad Beep - ON / OFF [Enables / Disables Audible keypad touch
confirmation].
Auto Log Off – OFF or 1-10 Minutes [This feature will close the Configuration
Menu after XX minutes of inactivity. This is a security feature.]
Setup Wizard
The Setup Wizard allows you to define global recording settings for an easy
and custom recording schedule on the DVR.
Global Resolution – 352 x240 / 704 × 240 / 704 × 480.
Motion/Continuous – Motion / Continuous.
Average Days to Record – [The estimated days of recording determined by
resolution, IPS (Images Per Second), Picture Quality, and available storage
size.]
Average IPS – 1-8 [Maximum varies with resolution.]
Average Picture Quality – Low / Normal / High / Ultra.
352X240
CONTINUOUS
8.1 DAYS
1 IPS
LOW
GLOBAL RESOLUTION
MOTION/CONTINUOUS
AVERAGE DAYS TO RECORD
AVERAGE IPS
AVERAGE PICTURE QUALITY
To Next Page
Loading...
Need help?
General