Appendices
B-1
Appendix B: Central Station Messages
Alarm Condition
ECP Mode
Alarm Code Restore Code
Power On / Reset E339 C08xx*
ECP Supervision
(Compromise Indication)
E355 C0000 R355 C0000
Primary Comm Path Supervision E350 C0951 R350 C0951
Secondary Comm Path Supervision E350 C0952 R350 C0952
Periodic Cell Comm Test Failure E358 C0803
Application Code Update E903 C08xx
R903 C08xx
(success)
Application Code Update Failure E904 C08xx
Module Firmware Update E365 C08xx
R365 C08xx
(success)
Module Firmware Update Failure E366 C08xx
Test 5555 5555 9
Specific to COMMERCIAL Control Panels (Such as the VISTA-128 / 250 series.)
Communicator Trouble (ECP bus, network)
(Possible Compromise Indication)
E333 C08xx* ‡ R333 C08xx* ‡
Radio Loss of Signal
(Possible Compromise Indication)
E357 0 8xx* †
R357 0 8xx* ‡ or
R380 0 8xx* ‡
Radio Fault (ECP Bus) E333 0 8xx* ‡ R333 0 8xx* ‡
AlarmNet Messages
Communication failure.
(Possible Compromise Indication)
E359 0 C950 R359 0 C950
Authorized Radio Substitution 00D0 010C 0
Unauthorized Radio Substitution Attempt 00D0 010E 0
Service Termination 00D0 020E 0
* xx = Communicator Device Address
† = Message is sent by dialer only.
‡ = Message is sent by dialer and radio.
◊ = Message is sent by dialer only, or dialer and radio, depending on failure.