www.honeywell.com/security
46 | Performance Series IP Cameras User Guide
Configuring the Live View Window
Figure 3-11 Live View Window Tool Bar
Video Window Configuration
The video window configuration controls include these icons:
Figure 3-12 Video Window Configuration Controls
Table 3-3 Live View Window Tool Bar
SN Tool Function
Digital zoom • When the video is in the original state, click
and hold down the left mouse button
on Live video to zoom in on a specific area.
Right-click the mouse to restore previous
view.
• Click , then use the middle mouse
button to zoom in/out on the live video.
Snapshot Click to take a snapshot of an important scene.
The snapshot is saved to \picture download
(default). Snapshots are saved in JPEG format.
See Path on page 57 for information about
configuring where snapshots are saved.
To change the default save path, go to
Setup>Camera>Video>Path.
Triple snap Click, and the camera snaps at 1 f/s. All images
are saved to Setup>Camera>Video>Path.
Record Click to start manual recording. All video is
recorded in Setup>Camera>Video>Path.
Help Click to open the Help file.
Table 3-4 Video Window Configuration Controls
Icon Function
Image Control
Original Size
Full Screen
Width and Height Ratio
Adjust Fluency
To Next Page
Loading...
Need help?
General